Skip to main content
Zanussi | Help and Support

Dishwasher continually takes in water

Issue
  • Dishwasher continually takes in water. The problem is caused by the drain hose.
Applies to
  • Integrated dishwasher
  • Freestanding dishwasher
Resolution

1. Ensure that the drain hose has been installed correctly.

Make sure that:

  • The length of the drain hose does not exceed 400 cm.
  • The drain inlet point must be between 40 and 85 cm.
  • The drain hose is not damaged, kinked or twisted.

2dish.png

2. Contact an Authorized Service Centre

If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer

 

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.